Configure Dsl Interfaces - Digi TransPort WR11 User Manual

Configuring network interfaces

Configure DSL interfaces

Router models incorporating a DSL broadband interface includes a configuration page having the title
shown above. By default, the configuration in this section is suitable for the majority of ADSL service
providers in the UK. However, advanced users or users outside of the UK may want or need to adjust
some of the parameters.
É
Web
1. Go to Configuration > Network > Interfaces > DSL.
2. Configure the DSL parameters as needed:
Enable DSL
Enables or disables the use of DSL/ADSL functionality on the router.
Configure PVC
Select the required PVC instance from the drop-down selection box. Subsequent settings
applies to the selected instance. See additional topics in this section.
3. Click Apply.
Digi TransPort® Routers User Guide
Configure DSL interfaces
257