Additional Information On Power Control - Digi TransPort WR11 User Manual

Configuring system settings

Additional information on power control

For more information, see
É
Web
1. Go to Configuration > System > Power Control. The currently selected power control profile
is shown in the Current profile field. By default, Profile 0 is selected. Each power control profile
has these settings:
CPU speed
Sets the CPU speed for the router. You can set this value to High for high speed, and Low for
low speed.
LEDs
Enables or disables the illumination of front-panel LEDs.
Mobile Module
Enables or disables the cellular module.
GPS
Enables or disables GPS functionality .
GPRS
Enables or disables GPRS functionality .
Ethernet
Enables or disables Ethernet capability.
Wi-Fi
Enables or disables Wi-Fi functionality.
DSL
Enables or disables DSL functionality.
USB
Enables or disables the USB port.
2. Click Apply.
Digi TransPort® Routers User Guide
Application Note 67: Using The Low Power Modes on
Set power control options
TransPort.
728