Using the command-line interface
at\smib=mib-2.ip.iproutetable.iprouteentry.iprouteifindex: Show index number for next hop
of the route
Shows the index value which uniquely identifies the local interface through which the next hop of the
route should be reached.
at\smib=mib-2.ip.iproutetable.iprouteentry.iproutemetric1: Show the metric for a route
Shows the primary routing metric for the route.
at\smib=mib-2.ip.iproutetable.iprouteentry.iproutenexthop: Show the IP address of the next
hop of the route
Shows the IP address of the next hop of the route.
at\smib=mib-2.ip.iproutetable.iprouteentry.iproutetype: Show route type
Shows the type of route. Valid values are:
1. Valid
2. Invalid
3. Direct
4. Indirect
at\smib=mib-2.ip.iproutetable.iprouteentry.iproutemask: Show the netmask for the route
Shows the netmask for the route.
Digi TransPort® Routers User Guide
AT commands
173