Digi TransPort WR11 User Manual page 550

Configuring Secure Shell (SSH) server and client
given a value of 2 or greater. If all these parameters are set to the same value, the router
automatically uses them in the following order: SHA1, SHA1-96, MD5, MD5-96.
MAC MD5
The preference level for MAC MD5.
MAC MD5-96
The preference level for MAC MD5-96.
MAC SHA1
The preference level for MAC SHA1.
MAC SHA1-96
The preference level for MAC SHA1-96.
Enable Server Keepalives
When enabled, enables server keepalives to use the same tcp connection for HTTP
conversation instead of opening new one with each new request.
Enable Debug
The router supports logging and output of debugging information for situations where there
are problems establishing a SSH connection. When enabled, this setting causes the router to
trace and output information that should be helpful in diagnosing and resolving the problem.
3. Click Apply.
Command line
Command Instance Parameter
sshcli 0-7
sshcli 0-7
Digi TransPort® Routers User Guide
conn_to
hostsfile
Values
0-10 seconds
Up to 12 characters (8.3
format)
Configure the SSH client
Equivalent
web
parameter
Time in
seconds to
wait for the
server to
begin the
banner
exchange part
of the protocol
after the
socket
connects.
Key file to use
as the regular
SSH client.
550