Performing device administration tasks
Save configuration settings to a file
Once you have configured the router, save the settings to non-volatile memory to avoid losing them
when the power is removed.
You have two choices on saving configuration settings: saving the current configuration or saving the
router's entire configuration.
Save the current configuration
The Save button in the web interface and the config command save the current configuration to the
specified configuration file, config.da0 or config.da1. The default power-up configuration profile is
profile 0. The extension*.da0 indicates that the configuration profile in use is profile 0. An extension
of *.da1 indicates that configuration profile 1 is in use. Not every configuration setting is saved,
however. See the Save All option.
Save All: Save the entire configuration
The Save All button in the web interface and saveall command save the router's entire configuration.
This operation performs the following actions:
Saves the current configuration parameters to the file config.da0 or config.da1. The default
n
power-up configuration profile is profile 0. The extension*.da0 indicates that the configuration
profile in use is profile 0. An extension of *.da1 indicates that configuration profile 1 is in use.
Saves the ciphered versions of the passwords to the file pwds.da0 or pwds.da1 file**.
n
Saves the firewall configuration to the file fw.txt.
n
Saves the serial port configuration to profile0 of the sregs.dat.
n
Saves the PAD parameters on all the PADs to profile 0 of the file x3prof.
n
É
Web
1. Go to Administration - Save configuration.
Digi TransPort® Routers User Guide
Save configuration settings to a file
938