Digi TransPort WR11 User Manual page 746

Configuring remote management
SNMPv3 settings
Username
The name of the SNMP user.
Authentication None, MD5, SHA1, SHA256
Select the authentication algorithm to apply to SNMP transactions.
Authentication Password
The authentication password for the user.
Confirm Authentication Password
The authentication password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Encryption None, DES, AES
These three radio buttons select which encryption (privacy) algorithm should be applied to the
SNMP data.
Encryption Password
Enter the user's password for controlling privacy of the SNMP transactions into this text box.
Confirm Encryption Password
The encryption password is not shown as clear text. The confirmation box allows a simple
check that the password was entered correctly.
3. Click Apply.
Command line
Command Instance
snmpuser n
snmpuser n
snmpuser n
snmpuser n
snmpuser n
snmpuser n
Digi TransPort® Routers User Guide
Parameter Values
community public / private
name user_name
auth Off,MD5,SHA1
authPassword my_password
priv Off,DES,AES
privPassword my_password
Use SNMP for remote management
Equivalent web parameter
Community
Username
Authentication, None, MD5, SHA1
Authentication Password
Encryption, None, DES, AES
Encryption Password
746