Digi TransPort WR11 User Manual page 830

Managing networks and connections
Collisions
The number of times the router has detected a packet collision on the Ethernet network when
transmitting a packet.
Late Collisions
The number of times the router has detected a late packet collision on the Ethernet network when
transmitting a packet.
Flood Protection
The number of times the router has detected an Ethernet packet flood on the network and has
enabled the Flood Protection mechanism. Flood protection is designed to stop the router from being
overwhelmed by the sudden large increase in packets on the Ethernet network.
Alignment Errors
The number of alignment errors that have been detected when receiving an Ethernet packet.
FCS Errors
The number of Ethernet packets that have been received but had an invalid FCS.
Tx Deferred
The Ethernet packets successfully transmitted after being initially deferred.
Long Frames
The number of Ethernet packets that have been received which are too long.
Carrier Sense Error
The number of carrier sense errors that have occurred. These errors occur when the router attempts
to transmit an Ethernet packet but cannot detect the carrier sense condition on the Ethernet
network.
Rx MAC Errors
The number of internal errors that have occurred when receiving an Ethernet packet.
Tx MAC Errors
The number of internal errors that have occurred when attempting to transmit an Ethernet packet.
Other Errors
The number of errors that have occurred that are not counted by the other statistics.
Command line
Command
eth
ethstat
at\mibclr=eth.n.stats n/a
Digi TransPort® Routers User Guide
Instance Parameter Action
n status Displays the current configuration and status of
Ethernet interface n.
n n/a Displays the statistics for Ethernet interface n.
n/a Clears the statistics for Ethernet interface n.
Show network interface status
830