Digi TransPort WR11 User Manual page 749

Configuring remote management
Community / Confirm Community
For SNMPv1 and SNMPv2c, these settings specify the SNMPv1 or SNMPv2c community name.
Username
The SNMPv3 user name.
Authentication
The SNMPv3 authentication type: None, MD5, SHA1, or SHA256.
Authentication Password / Confirm Authentication Password
The SNMPv3 authentication password.
Encryption
The SNMPv3 encryption type: None, DES, or AES.
Encryption Password / Confirm Encryption Password
The SMPv3 encryption password.
4. Click Apply.
Command line
Command
snmp
snmp
snmp
snmp
snmptrap
snmptrap
snmptrap
snmptrap
snmptrap
snmptrap
snmptrap
snmptrap
Digi TransPort® Routers User Guide
Instance Parameter
0 enterprisetraps
0 generictraps
0 authtraps
0 vrrptraps
0 ipaddr
0 port
0 version
0 sendinforms
0 informto
0 informretries
0 auth
0 authpassword
Use SNMP for remote management
Values Equivalent web parameter
off, on Generate Enterprise traps
off, on Generate Generic traps
off, on Generate Authentication Failure
traps
off, on Generate VRRP traps
IP address Trap Server IP Address
network port Port
number
Use SNMP Version
off, on Send "Inform Request" message
integer If no response, retransmit the
Inform Request message after n
seconds
integer Retransmit a maximum n times
none, md5, Authentication
sha1, sha256
password Authentication Password
749