Digi TransPort WR11 User Manual page 575

Configuring Quality of Service (QoS)
To display a DSCP mapping from the command line, enter:
n
dscp <code> ?
Where <code> is a valid DSCP code from 0 to 63, or 64 (see note below).
To change the value of a parameter, enter:
n
dscp <code> q <val ue>
Where <code> is a valid DSCP code and <value> is from 0 to 9.
To set the default mapping value, enter:
n
dscp 64 q <val ue>
Where <value> is the default queue number required and has a value from 0 to 9.
Note DSCP code 64 is not actually a valid code, but is employed here to set up the default
priority.
Configure Queue Profiles parameters
Entity Instance
qprof n
qprof n
qprof n
qprof n
qprof n
qprof n
qprof n
To display a queue profile, enter:
n
gqpr of <i nst ance> ?
Where <instance> is the number of the queue profile to be displayed.
To change the value of a parameter, enter:
n
qpr of <i nst ance> <par am et er > <val ue>
To set the maximum throughput for queue profile 5 to 10kbps, enter:
n
qpr of 5
Digi TransPort® Routers User Guide
Parameter Values
minkbps 0-2147483647
maxkbps 0-2147483647
qlen 0-2147483647
minth 0-2147483647
maxth 0-2147483647
mprob 0-100
wfact 0-2147483647
m axkbps 10
Configure Quality of Service (QoS)
Equivalent web parameter
Minimum kbps
Maximum kbps
Maximum Packet Queue Length
WRED Minimum Threshold
WRED Maximum Threshold
WRED Maximum Drop Probability (%)
WRED Queue Length Weight factor
575