Digi TransPort WR11 User Manual page 43

Hardware features
Max power
2 W
1 W
200 mW
Innovation, Science, and Economic Development Canada (IC) certifications
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables
aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.
Hazardous Location installation information for TransPort WR21
For Hazardous Location installation, see the TransPort WR21 Hazardous Location User Guide (Digi part
number 90001532).
Safety notices
1. Please read all instructions before installing and powering the router. You should keep these
instructions in a safe place for future reference.
2. If the power supply shows signs of damage or malfunction, stop using it immediately, turn off
the power and disconnect the power supply before contacting your supplier for a repair or
replacement.
3. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment. Use only the accessories, attachments,
and power supplies provided by the manufacturer-connecting non-approved antennas or
power supplies may damage the router, cause interference or create an electric shock hazard,
and will void the warranty.
4. Do not attempt to repair the product. The router contains no electronic components that can
be serviced or replaced by the user. Any attempt to service or repair the router by the user will
void the product warranty.
5. The TransPort WR21 is designed for indoor use. Use it in an environment suitable for
computers and other electronic equipment.
6. Ports that are capable of connecting to other apparatus are defined as SELV ports. To ensure
conformity with IEC60950 ensure that these ports are only connected to ports of the same
type on other apparatus.
Special notes on safety for wireless routers
Digi International products are designed to the highest standards of safety and
international standards compliance for the markets in which they are sold. However,
cellular-based products contain radio devices which require specific consideration.
Please take the time to read and understand the following guidance. Digi International
assumes no liability for an end user's failure to comply with these precautions.
Digi TransPort® Routers User Guide
Frequencies
Cellular 850 and 900 MHz bands
Cellular 1800 and 1900 MHz Bands
Cellular @450 MHz Band
TransPort WR21 hardware features
43