Debuggers (Sim911, Eml911, And Mon911) - Fujitsu FR60 Hardware Manual

2.2.4

Debuggers (sim911, eml911, and mon911)

When creating programs that use the little-endian area, note the following points
regarding the debuggers:
■ Simulator Debugger
There is no memory space specification command for displaying the little-endian area.
Therefore, when memory operator commands or instructions that manipulate memory are executed, the
area is handled as a big-endian area.
■ Emulator and Monitor Debuggers
Note that the data will not be handled using its correct values when the following commands are used to
access the little-endian area:
• set memory, show memory, enter, examine, and set watch commands
When floating-point (single or double) data is handled, setting or display of the specified values will not
be possible.
• search memory command
When a search uses halfword or word data, execution of the search with the specified values will not be
possible.
• Line/reverse assembly (including display of reverse assembly in the source window)
Setting or display of the correct instruction codes will not be possible. (Do not map instruction codes in
the little-endian area.)
• call and show call commands
Operation will be unpredictable if the stack area is mapped in the little-endian area. (Do not map the
stack area in the little-endian area.)
43