Panasonic FP-E Programming Manual page 244

Basic Instructions
System registers
No.
Range of link relays used
40
41 Range of link data registers used
Starting number for link relay
42
transmission
43 Link relay transmission size
PLC PLC
Starting number for link data register
WO−0
44
transmission
45 Link data register transmission size
46 PC (PLC) Link switch flag
Maximum unit number setting for
47
MEWNET−W0 PLC link
50 Range of link relays used
51 Range of link data registers used
Starting number for link relay
52
transmission
PLC 53 Link relay transmission size
WO−1 WO 1
Starting number for link data register
54
transmission
55 Link data register transmission size
Maximum unit number setting for
57
MEWNET−W0 PLC link
Program example
F0 MV , K 64, DT0
F0 MV , K 128, DT1
F0 MV , K 0, DT2
F0 MV , K 10, DT3
F0 MV , K 0, DT4
F0 MV , K 10, DT5
F0 MV , K 0, DT6
F0 MV , K 5, DT7
SYS2 , DT0, K40, K47
Decimals of the average value are rounded off so that the average value is an integer.
2 − 134
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name Setting value and range
0 to 64 words
0 to 128 words
0 to 63
0 to 64 words
0 to 127
0 to 127 words
Normal/reverse
1 to 16
0 to 64 words
0 to 128 words
64 to 127
0 to 64 words
128 to 255
0 to 127 words
1 to 16
Set value of system register 40
Set value of system register 41
Set value of system register 42
Set value of system register 43
Set value of system register 44
Set value of system register 45
Set value of system register 46
Set value of system register 47
Sets the values stored in DT0 to DT7 in system
registers 40 to 47
FPΣ/FP−X/FP0R