3.1
Composition of High-level Instructions
When you use the "P" type instruction with one of the following instructions that changes
the order of the execution of instructions, be aware that the operation of the instructions
will differ depending on the timing of their execution and their execution conditions
(triggers).
− MC to MCE instructions
− JP to LBL instructions
− F19 (SJP) to LBL instructions
− LOOP to LBL instructions
− CNDE instruction
− Step ladder instructions
− Subroutine instruction
For detailed information
section 4.3
When combining the "P" type high−level instruction with an AND stack instruction or pop
stack instruction, be careful that the programming is correct. For detailed information
section 4.7
3 - 7
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com