Uart1Imsc (Uart1 Interrupt Mask Set/Clear Register) - Wiznet W7500 Reference Manual

Internet offload processor

Hide thumbs Also See for W7500:

Table of Contents

[2:0] TXIFLSEL – Transmit interrupt FIFO level select

UART1IMSC (UART1 Interrupt Mask Set/Clear Register)

Address offset: 0x0038

Reset value: 0x00

The UART1IMSC register is the interrupt mask set/clear interrupts. When a bit of UART1IMSC

is „1‟ and the corresponding bit of interrupt register is „1‟, an interrupt will be issued.

In other words, if a bit of UART1IMSC is „0‟, an interrupt will not be issued even if the

corresponding bit of interrupt register is „1‟.

[10] OEIM – Overrun error interrupt mask

0: Disable UART1OEINTR

1: Enable UART1OEINTR

[9] BEIM – Break error interrupt mask

0: Disable UART1BEINTR

1: Enable UART1BEINTR

[8] PEIM – Parity error interrupt mask

0: Disable UART1EINTR

1: Enable UART1EINTR

[7] FEIM – Framing error interrupt mask

0: Disable UART1FEINTR

1: Enable UART1FEINTR

[6] RTIM – Receive timeout interrupt mask

0: Disable UART1RTINTR

1: Enable UART1RTINTR

[5] TXIM – Transmit interrupt mask

0: Disable UART1TXINTR

1: Enable UART1TXINTR

[4] RXIM – Receive interrupt mask

W7500 Datasheet Version1.0.0