Figure 26 Periodic Mode; Figure 27 One-Shot Mode; Figure 28 Up-Count Mode; Figure 29 Down-Count Mode - Wiznet W7500 Reference Manual

In one-shot mode, the Timer /Counter reset to the initial value and then stops when the
Timer/Counter reaches the value of limit register. Figure 27 shows one-shot mode timing
diagram.
PWMCLK
Prescale
1 2
Counter
Timer/Counter 10
Overflow
Interrupt
Counting mode
The Timer/Counter has two counting mode: Up-count and Down-count mode. In up-count
mode, the Timer/Counter counts up from 0 to the limit register value, then recycles. If
repetition mode is periodic, the Timer/Counter restarts, if repetition mode is one-shot mode,
the Timer/Counter stops. Figure 28 shows up-count mode timing diagram.
PWMCLK
Prescale
1 2
Counter
Timer/Counter 10
In Down-count mode, the Timer/Counter counts from 0xFFFF_FFFF, then recycles. If
repetition mode is periodic, the Timer/Counter restarts, if repetition mode is one-shot mode,
the Timer/Counter stops. Figure 29 shows down-count mode timing diagram.
PWMCLK
Prescale
1 2
Counter
Timer/Counter 15
Timer and Counter mode
W7500 Datasheet Version1.0.0

Figure 26 Periodic mode

0 1 2 0 1
11 12

Figure 27 one-shot mode

0 1 2 0 1
11 12

Figure 28 Up-count mode

0 1 2 0 1
14 13

Figure 29 Down-count mode

2
2 0 1 2 0
13
2 0 1 2 0
12
0
0
1 2 0 1 2
14 15
1 2 0 1 2
11 10
293 / 512