Customizing Cdrs For Sbc Calls - AudioCodes Mediant 4000 SBC User Manual

User's Manual
CDR Field
SIP Termination Description
Caller Display ID
Callee Display ID

52.2.2 Customizing CDRs for SBC Calls

The SBC CDR Format table lets you customize SBC-related CDRs that are generated by
the device for the following:

CDRs (media and SIP signaling) sent in Syslog messages. For CDRs sent in Syslog
messages, you can customize the name of the CDR field. The table lets you configure
up to 128 Syslog CDR customization rules.

CDRs related to RADIUS accounting and sent in RADIUS accounting request
messages. For RADIUS accounting CDRs, you can customize the RADIUS Attribute's
prefix name and RADIUS Attribute's ID, for standard RADIUS Attributes and vendor-
specific RADIUS Attributes (VSA). For example, instead of the default VSA name,
"h323-connect-time" with RADIUS Attribute ID 28, you can change the name to "Call-
Connect-Time" with ID 29. The table lets you configure up to 40 RADIUS-accounting
CDR customization rules. For more information on RADIUS accounting, see
''Configuring RADIUS Accounting'' on page 750.

CDRs stored locally on the device. For local storage of CDRs, you can customize the
name of the CDR field. The table lets you configure up to 64 locally-stored CDR
customization rules. For more information on storing CDRs on the device, see Storing
CDRs on the Device on page 747.
If you do not configure a CDR customization rule for a specific CDR, the device generates
the CDR in a predefined default CDR format (see ''CDR Field Description'' on page 734).
Note:
•
The following standard RADIUS Attributes cannot be customized: 1 through 6, 18
through 20, 22, 23, 27 through 29, 32, 34 through 39, 41, 44, 52, 53, 55, 60
through 85, 88, 90, and 91.
•
If the RTCP XR feature is unavailable (not licensed or disabled), the R-factor VoIP
metrics are not provided in CDRs (CDR fields, Local R Factor and Remote R
Factor) generated by the device. Instead, these CDR fields are sent with the value
127, meaning that information is unavailable.
The following procedure describes how to customize SBC-related CDRs through the Web
interface. You can also configure it through ini file (SBCCDRFormat) or CLI (configure
troubleshoot > cdr > cdr-format sbc-cdr-format).

To customize SBC-related CDRs:
1. Open the SBC CDR Format table (Troubleshoot menu > Troubleshoot tab > Call
Detail Record folder > SBC CDR Format).
Version 7.2
52. Reporting Information to External Party
SIPTermDesc
Caller
Callee
743
Title
Mediant 4000 SBC