AudioCodes Mediant 4000 SBC User Manual page 397

Session border controller
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

User's Manual
Note:
For a detailed description of the syntax used for configuring Message Manipulation
rules, refer to the SIP Message Manipulations Quick Reference Guide.
Inbound message manipulation is done only after the Classification,
inbound/outbound number manipulations, and routing processes.
Each message can be manipulated twice - on the source leg and on the
destination leg (i.e., source and destination IP Groups).
Unknown SIP parts can only be added or removed.
SIP manipulations do not allow you to remove or add mandatory SIP headers.
They can only be modified and only on requests that initiate new dialogs.
Mandatory SIP headers include To, From, Via, CSeq, Call-Id, and Max-Forwards.
The SIP Group Name (IPGroup_SIPGroupName) parameter overrides inbound
message manipulation rules that manipulate the host name in Request-URI, To,
and/or From SIP headers. If you configure a SIP Group Name for the IP Group
(see ''Configuring IP Groups'' on page 349) and you want to manipulate the host
name in these SIP headers, you must apply your manipulation rule (Manipulation
Set ID) to the IP Group as an Outbound Message Manipulation Set
(IPGroup_OutboundManSet), when the IP Group is the destination of the call. If
you apply the Manipulation Set as an Inbound Message Manipulation Set
(IPGroup_InboundManSet), when the IP Group is the source of the call, the
manipulation rule will be overridden by the SIP Group Name.
The following procedure describes how to configure Message Manipulation rules through
the Web interface. You can also configure it through ini file (MessageManipulations) or CLI
(configure voip > message message-manipulations).
To configure SIP message manipulation rules:
1.
Open the Message Manipulations page (Setup menu > Signaling & Media tab >
Message Manipulation folder > Message Manipulations).
2.
Click New; the following dialog box appears:
Figure 19-3: Message Manipulations Table - Add Dialog Box
Version 7.2
19. SIP Message Manipulation
397
Mediant 4000 SBC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 4000b sbc

Table of Contents