AudioCodes Mediant 4000 SBC User Manual page 226

Table 15-6: SIP Recording Rules Table Parameter Descriptions
Parameter
General
Index
[SIPRecRouting_Index]
Recorded IP Group
recorded-ip-group-name
[SIPRecRouting_RecordedIPGroupName]
Recorded Source Prefix
recorded-src-prefix
[SIPRecRouting_RecordedSourcePrefix]
Recorded Destination Prefix
recorded-dst-prefix
[SIPRecRouting_RecordedDestinationPrefix]
Condition
condition-name
[SIPRecRouting_ConditionName]
Peer IP Group
peer-ip-group-name
[SIPRecRouting_PeerIPGroupName]
Caller
caller
[SIPRecRouting_Caller]
Recording Server
Recording Server (SRS) IP Group
srs-ip-group-name
[SIPRecRouting_SRSIPGroupName]
User's Manual
Description
Defines an index number for the new table record.
Defines the IP Group participating in the call and
the recording is done on the leg interfacing with this
IP Group. To configure IP Groups, see
''Configuring IP Groups'' on page 349.
By default, all IP Groups are defined (Any).
Note:
The parameter is mandatory.


For an SBC RTP-SRTP session, the recorded
IP Group must be set to the RTP leg if recording
is required to be RTP, or set to the SRTP leg if
recording is required to be SRTP.
Defines calls to record based on source number or
URI.
By default, all source numbers or URIs are defined
(*).
Defines calls to record based on destination
number or URI.
By default, all destination numbers or URIs are
defined (*).
Assigns a Message Condition rule to the SIP
Recording rule to base the start of call recording on
a specific condition. To configure Message
Condition rules, see "Configuring Message
Condition Rules" on page 400. For more
information on using conditions with SIPRec, see
"Using Conditions for SIPRec Sessions" on page
227.
Defines the peer IP Group that is participating in
the call.
By default, all IP Groups are defined (Any).
Defines which calls to record according to which
party is the caller.

[0] Both = (Default) Caller can be peer or
recorded side

[1] Recorded Party

[2] Peer Party
Defines the IP Group of the recording server
(SRS).
By default, no value is defined..
Note:

The parameter is mandatory.
226
Mediant 4000 SBC
Document #: LTRT-40203