AudioCodes Mediant 4000 SBC User Manual page 379

User's Manual
Parameter
[Account_ApplicationType]
Serving IP Group
serving-ip-group-name
[Account_ServingIPGroupName]
Host Name
host-name
[Account_HostName]
Register
register
[Account_Register]
Contact User
contact-user
[Account_ContactUser]
Version 7.2
Defines the IP Group (Serving IP Group) to where the
device sends the SIP REGISTER requests (if enabled) for
registration and authentication (of the Served IP Group).
Note:

By default, only IP Groups associated with the SRD to
which the Served IP Group is associated are
displayed, as well as IP Groups of Shared SRDs.
However, if you filter the Web display by SRD (using
the SRD Filter box), only IP Groups associated with
the filtered SRD are displayed, as well as IP Groups of
Shared SRDs.

The parameter is mandatory.
Defines the Address of Record (AOR) host name. The
host name appears in SIP REGISTER From/To headers
as ContactUser@HostName. For a successful
registration, the host name is also included in the URI of
the INVITE From header.
The valid value is a string of up to 49 characters.
Note: If the parameter is not configured or if registration
fails, the 'SIP Group Name' parameter value configured in
the IP Groups table is used instead.
Enables registration.

[0] No= (Default) The device only performs
authentication (not registration). Authentication is
typically done for INVITE messages sent to the
"serving" IP Group. If the device receives a SIP 401
(Unauthorized) in response to a sent INVITE, the
device checks for a matching "serving" and "served"
entry in the table. If a matching row exists, the device
authenticates the INVITE by providing the
corresponding MD5 authentication username and
password to the "serving" IP Group.

[1] Regular = Regular registration process. For more
information, see ''Regular Registration Mode'' on page
382.

[2] GIN = Registration for legacy PBXs, using Global
Identification Number (GIN). For more information, see
''Single Registration for Multiple Phone Numbers using
GIN'' on page 382.
Note: The account registration is not affected by the
IsRegisterNeeded parameter.
Defines the AOR username. This appears in REGISTER
From/To headers as ContactUser@HostName, and in
INVITE/200 OK Contact headers as
ContactUser@<device's IP address>.
Note:

If the parameter is not configured, the 'Contact User'
parameter in the IP Groups table is used instead.

If registration fails, the user part in the INVITE Contact
379
18. SIP Definitions
Description
Mediant 4000 SBC