Viewing Logged-In User Information; Configuring Web Session And Access Settings - AudioCodes Mediant 4000 SBC User Manual

User's Manual
6.6

Viewing Logged-In User Information

The username of the currently logged in user is displayed in the top-right corner of the Web
interface. If you click the username (e.g., "Admin"), a pop-up callout appears:
The following information is displayed:

'Access Level': User level of the currently logged in user (e.g., Security Administrator).

'Session Time': Duration of the current Web session (starting from login).
The Log Out button is also provided for logging out of the Web session (see ''Logging Off
the Web Interface'' on page 62).
6.7

Configuring Web Session and Access Settings

The following procedure describes how to configure security features related to Web user
sessions and access.
Note:
management user with Security Administrator level or Master level. For more
information, see ''Configuring Management User Accounts'' on page 69.

To configure Web user sessions and access security:
1. Open the Web Settings page (Setup menu > Administration tab > Web & CLI folder
> Web Settings).
2. Under the Session group, configure the following parameters:
•
'Password Change Interval': Duration (in minutes) of the validity of the Web login
passwords. When the duration expires, the user must change the password in
order to log in again.
Version 7.2
Figure 6-32: Logged-in User Information
You can only perform the configuration described in this section if you are a
Figure 6-33: Configuring Web User Sessions
75
6. Web-Based Management
Mediant 4000 SBC