User's Manual
You can also view the mapping of the ports, using the following CLI command:
# show network physical-port
Note:
•
The device provides two MAC addresses for the LAN ports which are allocated as
follows: a MAC address for ports GE_1 through GE_4, and a MAC address for
ports GE_5 through GE_8.
•
Each Ethernet port must have a unique VLAN ID in scenarios where the ports are
connected to the same switch.
The following procedure describes how to configure Ethernet ports through the Web
interface. You can also configure it through ini file (PhysicalPortsTable) or CLI (configure
network > physical-port).
To configure the physical Ethernet ports:
1.
Open the Physical Ports table (Setup menu > IP Network tab > Core Entities folder >
Physical Ports).
2.
Select a port that you want to configure, and then click Edit; the following dialog box
appears:
Version 7.2
123
11. Network
Mediant 4000 SBC