AudioCodes Mediant 4000 SBC User Manual page 243

User's Manual
Parameter
server-group
[LdapConfiguration_Group]
LDAP Network Interface
interface-type
[LdapConfiguration_Interface]
Use TLS
use-tls
[LdapConfiguration_useTLS]
TLS Context
tls-context
[LdapConfiguration_ContextN
ame]
Connection
LDAP Server IP
server-ip
[LdapConfiguration_LdapConf
ServerIp]
LDAP Server Port
server-port
[LdapConfiguration_LdapConf
ServerPort]
LDAP Server Max Respond
Time
max-respond-time
[LdapConfiguration_LdapConf
ServerMaxRespondTime]
Version 7.2
Groups'' on page 240).
Note:

The parameter is mandatory and must be set before configuring
the other parameters in the table.

Up to two LDAP servers can be assigned to the same LDAP
Server Group.
Assigns one of the device's IP network interfaces through which
communication with the LDAP server is done.
By default, no value is defined and the device uses the OAMP
network interface, configured in the IP Interfaces table.
To configure IP network interfaces, see ''Configuring IP Network
Interfaces'' on page 129.
Note: The parameter is mandatory.
Enables the device to encrypt the username and password (for
Control and Management related queries) using TLS when sending
them to the LDAP server.

[0] No = (Default) Username and password are sent in clear-text
format.

[1] Yes
Assigns a TLS Context for the connection with the LDAP server.
By default, no value is defined and the device uses the default TLS
Context (ID 0).
To configure TLS Contexts, see ''Configuring TLS Certificate
Contexts'' on page 103.
Note: The parameter is applicable only if the 'Use TLS' parameter is
configured to Yes.
Defines the IP address of the LDAP server (in dotted-decimal
notation, e.g., 192.10.1.255).
By default, no IP address is defined.
Note:

The parameter is mandatory.

If you want to use an FQDN for the LDAP server, leave the
parameter undefined and configure the FQDN in the 'LDAP
Server Domain Name' parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port number is 389.
Defines the duration (in msec) that the device waits for LDAP server
responses.
The valid value range is 0 to 86400. The default is 3000.
Note: If the response time expires, you can configure the device to
use the Local Users table for authenticating the user. For more
information, see ''Configuring Local Database for Management User
Authentication'' on page 253.
243
Description
15. Services
Mediant 4000 SBC