Cdr Fields For Sbc Media - AudioCodes Mediant 4000 SBC User Manual

Session border controller

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

User's Manual

Below shows an example of an SBC signaling CDR sent at the end of a call (call was

terminated normally):

|TrmReasonCategory |SetupTime |ConnectTime |ReleaseTime

|RedirectReason |RedirectURINum |RedirectURINumBeforeMap

|TxSigIPDiffServ|IPGroup (description) |SrdId (name)

|SIPInterfaceId |ProxySetId |IpProfileId (name) |MediaRealmId

[S=41] |CALL_END |SBC |20767593291410201017029@10.33.45.80

|1871197419|LCL |10.33.45.80 |5060 |10.33.45.72 |5060 |UDP

|9001@10.8.8.10 |9001@10.8.8.10 |6001@10.33.45.80

|6001@10.33.45.80 |15 |LCL |GWAPP_NORMAL_CALL_CLEAR

|NORMAL_CALL_CLEAR |17:00:29.954

|17:00:49.052

2014 |-1 | | |40 |1 |0 (SRD_GW) |1 |1 |1 () |0 (MR_1) |no |BYE

|Q.850 ;cause=16 ;text="loc |user 9928019 |

52.2.1.2 CDR Fields for SBC Media

The default CDR fields for SBC media are listed in the following table. The media CDRs

are published for each active media stream, thereby allowing multiple media CDRs, where

each media CDR has a unique call ID corresponding to the signaling CDR.

There are three different CDR types (SBCReportType), which are sent to the CDR server

at different stages of the SIP dialog session:

"MEDIA_START": CDR is sent upon an INVITE message.

"UPDATE": CDR is sent upon a re-INVITE message (e.g., the established call is

placed on hold by one of the call parties).

"END": CDR is sent upon a BYE message (i.e., call ends)

The CDR types for SBC media and the SIP dialog stages are shown in the following figure:

MediaReportType

UTC Thu Oct 14 2014 |17:01:04.953

Figure 52-4: SBC CDR Types for Media

Table 52-3: Default CDR Fields for SBC Media

52. Reporting Information to External Party

UTC Thu Oct 14 2014

Report type:

UTC Thu Oct 14

Mediant 4000 SBC

Mediant 4000b sbc