AudioCodes Mediant 4000 SBC User Manual page 211

User's Manual
2. Click New; the following dialog box appears:
3. Configure a DHCP server according to the parameters described in the table below.
4. Click Apply.
Table 15-2: DHCP Servers Table Parameter Descriptions
Parameter
General
Index
dhcp server <index>
Interface Name
network-if
[DhcpServer_InterfaceName]
Start IP Address
start-address
[DhcpServer_StartIPAddress]
End IP Address
end-address
Version 7.2
Figure 15-1: DHCP Servers Table - Add Dialog Box
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

Currently, only one index row can be configured.
Associates an IP interface on which the DHCP server operates.
The IP interfaces are configured in the IP Interfaces table (see
''Configuring IP Network Interfaces'' on page 129).
By default, no value is defined.
Defines the starting IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server
to allocate addresses.
The default value is 192.168.0.100.
Note: The IP address must belong to the same subnet as the
associated interface's IP address.
Defines the ending IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server
Description
211
15. Services
Mediant 4000 SBC