# configure system
(config-system)# automatic update
(automatic-update)# template-url http://10.8.8.20/Site1_<FILE>
The device sends HTTP requests to the following URLs:
•
http://10.8.8.20/Site1_device.ini
•
http://10.8.8.20/Site1_fk.ini
•
http://10.8.8.20/Site1_cpt.data
3.
Place the files to download on the provisioning server. Make sure that their file names
and extensions are based on the hardcoded string values specific to the file type for
the <FILE> placeholder (e.g., "Site1_device.ini" for the ini file), as shown in the table
below.
Table 41-1: File Template Keywords and Placeholder Values per File Type
File Type
ini file
CLI Script file
CLI Startup Script file
CMP file based on timestamp
User Info file
CMP file
Feature Key file
Call Progress Tone (CPT) file
Prerecorded Tones (PRT) file
Dial Plan file
Answering Machine Detection (AMD)
file
SSL/TLS Private Key file
SSL/TLS Root Certificate file
SSL/TLS Certificate file
41.2.5 Triggers for Automatic Update
The Automatic Update feature can be triggered by the following:
Upon device startup (reset or power up). To disable this trigger, run the following CLI
command:
(config-system)# automatic-update
(automatic-update)# run-on-reboot off
User's Manual
Keywords for
Template File
ini
device.ini
cli
cliScript.txt
clis
cliStartupScript.txt
acmp
autoFirmware.cmp
usrinf
userInfo.txt
cmp
firmware.cmp
fk
fk.ini
cpt
cpt.dat
prt
prt.dat
dpln
dialPlan.dat
amd
amd.dat
sslp
pkey.pem
pkey<ID>.pem (for multi-certificate
system)
sslr
root.pem
root<ID>.pem (for multi-certificate
system)
sslc
cert.pem
cert<ID>.pem (for multi-certificate
system)
668
Mediant 4000 SBC
Value Replacing
<FILE> Placeholder
Document #: LTRT-40203