Radius And Ldap Parameters; General Parameters - AudioCodes Mediant 4000 SBC User Manual

Parameter
enable-sip-rec
[EnableSIPRec]
Recording Server (SRS)
Destination Username
configure voip > sip-definition
sip-recording settings >
siprec-server-dest-username
[SIPRecServerDestUsername]
SIP Recording Time Stamp
Format
configure voip > sip-
definition sip-
recording settings >
siprec-time-stamp
[SIPRecTimeStamp]
SIP Recording Rules Table
SIP Recording Rules
configure voip > sip-definition
sip-recording sip-rec-routing
[SIPRecRouting]

60.13.2 RADIUS and LDAP Parameters

60.13.2.1

General Parameters

The general RADIUS and LDAP parameters are described in the table below.
Table 60-42: General RADIUS and LDAP Parameters
Parameter
Use Local Users Database
configure system > mgmt-auth
> use-local-users-db
[MgmtUseLocalUsersDatabase]
User's Manual
Note: For the parameter to take effect, a device reset is required.
Defines the SIP user part for the recording server. This user part is
added in the SIP To header of the INVITE message that the device
sends to the recording server.
The valid value is a string of up to 50 characters. By default, no user
part is defined.
Defines the format of the device's time (timestamp) in SIP messages
that are sent to the SIP Recording Server (SRS).

[0] Local Time = (Default) The device's local time (without the
UTC time zone) is used for the timestamp.

[1] UTC = The device's UTC time is used for the timestamp.
Note: The timestamp is contained in the XML body of the SIP
message. If the timestamp uses the UTC time, the time is suffixed
with the letter "Z", for example:
<associate-time>2017-09-07T06:33:38Z</associate-time>
Defines SIP Recording Routing rules (for siprec).
The format of the ini file table parameter is as follows:
[ SIPRecRouting ]
FORMAT SIPRecRouting_Index =
SIPRecRouting_RecordedIPGroupName,
SIPRecRouting_RecordedSourcePrefix,
SIPRecRouting_RecordedDestinationPrefix,
SIPRecRouting_ConditionName,
SIPRecRouting_PeerIPGroupName,
SIPRecRouting_PeerTrunkGroupID, SIPRecRouting_Caller,
SIPRecRouting_SRSIPGroupName,
SIPRecRouting_SRSRedundantIPGroupName;
[ \SIPRecRouting ]
For more information, see ''Configuring SIP Recording Rules'' on
page 225.
Defines when the device uses the Local Users table or an
LDAP/RADIUS server for authenticating the login credentials
(username-password) of users when logging into the device's
management interface (e.g., Web or CLI).

[0] When No Auth Server Defined = (Default) The device
912
Mediant 4000 SBC
Description
Description
Document #: LTRT-40203