Configuring Sbc User Info Table Through Web Interface - AudioCodes Mediant 4000 SBC User Manual

37.6.2.1 Configuring SBC User Info Table through Web Interface

The following procedure describes how to configure the SBC User Info table through the
Web interface.
Note:
•
To configure the User Info table, make sure that you have enabled the feature as
described in Enabling the User Info Table on page 635.
•
If you load any User Info file to the device, all previously configured entries are
removed from the table in the Web interface and replaced with the entries from the
loaded User Info file.

To configure the SBC User Info table through the Web interface:
1. Open the SBC User Info table (Setup menu > Signaling & Media tab > SBC folder >
User Information).
2. Click New; the following dialog box appears:
3. Configure a user according to the table below.
4. Click Apply.
To register a user, select the user's table entry, and then from the Action drop-down list,
choose Register. To un-register a user, select the user, and then from the Action drop-
down list, choose Un-Register.
Table 37-2: SBC User Info Table Parameter Descriptions
Parameter
Index
[SBCUserInfoTable_Index]
Local User
[SBCUserInfoTable_LocalUser]
Username
User's Manual
Figure 37-3: SBC User Info Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the user and is used as the Request-URI user part for
the AOR in the database.
The valid value is a string of up to 10 characters.
Defines the username for registering the user when
Description
636
Mediant 4000 SBC
Document #: LTRT-40203