Configuring The Syslog Server Address; Configuring Syslog Debug Level - AudioCodes Mediant 4000 SBC User Manual

3. Click Apply.

53.2.3 Configuring the Syslog Server Address

The following procedure describes how to configure the Syslog server's address to where
the device sends Syslog messages.

To configure the Syslog server address:
1. Open the Syslog Settings page (Troubleshoot menu > Troubleshoot tab > Logging
folder > Syslog Settings).
2. In the 'Syslog Server IP' field (SyslogServerIP), enter the IP address of the Syslog
server.
3. In the 'Syslog Server Port' field, enter the port of the Syslog server.
Figure 53-3: Configuring the Syslog Server Address
4. Click Apply.

53.2.4 Configuring Syslog Debug Level

You can configure the amount of information (debug level) to include in Syslog messages.
You can also enable the device to send multiple Syslog messages bundled into a single
packet, and enable a protection mechanism that automatically lowers the debug level when
the device's CPU resources become low, ensuring sufficient CPU resources are available
for processing voice traffic.

To configure the Syslog debug level:
1. Open the Syslog Settings page (Troubleshoot menu > Troubleshoot tab > Logging
folder > Syslog Settings).
2. From the 'Debug Level' (GwDebugLevel) drop-down list, select the debug level of
Syslog messages:
•
No Debug: Disables Syslog and no Syslog messages are sent.
•
Basic: Sends debug logs of incoming and outgoing SIP messages.
•
Detailed: Sends debug logs of incoming and outgoing SIP message as well as
many other logged processes.
3. From the 'Syslog Optimization' (SyslogOptimization) drop-down list, select whether
you want the device to accumulate and bundle multiple debug messages into a single
UDP packet before sending it to a Syslog server. The benefit of the feature is that it
reduces the number of UDP Syslog packets, thereby improving (optimizing) CPU
utilization.
MaxBundleSyslogLength parameter.
4. From the 'Syslog CPU Protection' (SyslogCpuProtection) drop-down list, select
User's Manual
Figure 53-4: Configuring Syslog Debug Level
The size of the
770
bundled message is
Document #: LTRT-40203
Mediant 4000 SBC
configured by the