Creating A Login Welcome Message; Configuring Additional Management Interfaces - AudioCodes Mediant 4000 SBC User Manual

User's Manual
6.2.4

Creating a Login Welcome Message

You can create a personalized welcome message that is displayed on the Web Login
screen. The message always begins with the title "Note" and has a color background, as
shown in the example below:

To create a login welcome message:
1. Create an ini file that includes the WelcomeMessage table parameter. Use the
parameter to configure your message, where each index row is a line in your
message, for example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "** This is a Welcome message! **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
2. Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files on page
627).
3. Reset the device with a save-to-flash for your settings to take effect.

To remove the welcome message:
1. Load an empty ini file, using the Auxiliary Files page.
2. Reset the device with a save-to-flash for your settings to take effect.
6.3

Configuring Additional Management Interfaces

The Additional Management Interfaces table lets you configure up to 16 management
interfaces, in addition to the OAMP management interface in the IP Interfaces table.
Version 7.2
Figure 6-28: Creating Login Welcome Message
67
6. Web-Based Management
Mediant 4000 SBC