AudioCodes Mediant 4000 SBC User Manual page 916

Parameter
Use LDAP for Web > Telnet Login
configure system > ldap settings >
enable-mgmt-login
[MgmtLDAPLogin]
[LDAPDebugMode]
LDAP Numeric Attribute
ldap-numeric-attr
[LDAPNumericAttributes]
MS LDAP OCS Number attribute
name
configure voip > sip-definition settings
> ldap-ocs-nm-attr
[MSLDAPOCSNumAttributeName]
MS LDAP PBX Number attribute
name
configure voip > sip-definition settings
> ldap-pbx-nm-attr
[MSLDAPPBXNumAttributeName]
MS LDAP MOBILE Number attribute
name
configure voip > sip-definition settings
> ldap-mobile-nm-attr
[MSLDAPMobileNumAttributeName]
configure voip > sip-definition settings
> ldap-private-nm-attr
[MSLDAPPrivateNumAttributeName]
MS LDAP DISPLAY Name Attribute
Name
configure voip > sip-definition settings
> ldap-display-nm-attr
[MSLDAPDisplayNameAttributeName]
configure voip > sip-definition settings
> ldap-primary-key
[MSLDAPPrimaryKey]
User's Manual
Enables LDAP-based management-user login authentication
and authorization.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is
required.
Determines whether to enable the LDAP task debug
messages. This is used for providing debug information
regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Defines up to five LDAP Attributes (separated by commas)
for which the device employs LDAP query searches in the
AD for numbers that may have characters between the digits.
For more information, see ''Enabling LDAP Searches for
Numbers with Characters'' on page 259.
Defines the name of the attribute that represents the user's
Skype for Business number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "msRTCSIP-Line".
Defines the name of the attribute that represents the user
PBX number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "telephoneNumber".
Defines the name of the attribute that represents the user
Mobile number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "mobile".
Defines the name of the attribute that represents the user's
private number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter,
then the device queries the AD for the destination number in
this private attribute name; otherwise, the parameter is not
used as a search key.
The default is "msRTCSIP-PrivateLine".
Defines the attribute name that represents the Calling Name
in the AD for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default
is "displayName".
Defines the name of the attribute used as a query search key
for the destination number in the AD. This is used instead of
the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
916
Mediant 4000 SBC
Description
Document #: LTRT-40203