AudioCodes Mediant 4000 SBC User Manual page 138

Session border controller

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

Click New; the following dialog box appears:

Configure a static route according to the parameters described in the table below. The

address of the host/network you want to reach is determined by an AND operation that

is applied to the fields 'Destination' and 'Prefix Length'. For example, to reach network

10.8.x.x, enter "10.8.0.0" in the 'Destination' field and "16" in the 'Prefix Length'. As a

result of the AND operation, the value of the last two octets in the 'Destination' field

are ignored. To reach a specific host, enter its IP address in the 'Destination' field and

"32" in the 'Prefix Length' field.

Click Apply, and then reset the device with a save-to-flash for your settings to take

Only static routing rules that are inactive can be deleted.

Table 11-14: Static Routes Table Parameter Descriptions

[StaticRouteTable_Index]

[StaticRouteTable_Description]

[StaticRouteTable_Destination]

Prefix Length

prefix-length

[StaticRouteTable_PrefixLength]

User's Manual

Defines an index number for the new table row.

The valid value is 0 to 29.

Note: Each row must be configured with a unique index.

Defines a name for the rule.

The valid value is a string of up to 20 characters.

Defines the IP address of the destination host/network. The

destination can be a single host or a whole subnet, depending on

the prefix length configured for this routing rule.

Defines the Classless Inter-Domain Routing (CIDR)-style

representation of a dotted-decimal subnet notation of the

destination host/network. The CIDR-style representation uses a

suffix indicating the number of bits that are set in the dotted-

decimal format. For example, the value 16 represents subnet

255.255.0.0. The value must be 0 to 31 for IPv4 interfaces and a

Mediant 4000 SBC

Document #: LTRT-40203

Mediant 4000b sbc