Ocsp Parameters - AudioCodes Mediant 4000 SBC User Manual

Session border controller
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

User's Manual
Parameter
ids-clear-period
[IDSAlarmClearPeriod]
IDS Policy Table
IDS Policy Table
[IDSPolicy]
IDS Rule Table
IDS Rule Table
[IDSRule]
IDS Match Table
IDS Match Table
[IDSMatch]

60.5.7 OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Enable OCSP Server
configure network > ocsp >
enable
[OCSPEnable]
Version 7.2
Defines the interval (in seconds) after which an IDS alarm is cleared from
the Active Alarms table if no thresholds are crossed during this time.
However, this "quiet" period must be at least twice the Threshold Window
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For more information, see ''Configuring IDS Policies'' on page 172.
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For more information, see ''Configuring IDS Policies'' on page 172.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For more information, see ''Assigning IDS Policies'' on page 176.
Table 60-28: OCSP Parameters
Enables or disables certificate checking using OCSP.
[0] Disable (default)
[1] Enable
For a description of OCSP, see Configuring Certificate Revocation
847
60. Configuration Parameters Reference
Description
Description
Mediant 4000 SBC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 4000b sbc

Table of Contents