AudioCodes Mediant 4000 SBC User Manual page 318

Threshold Crossing
Red to Green (alarm cleared)
The following procedure describes how to configure Bandwidth Profiles through the Web
interface. You can also configure it through ini file (BWProfile) or CLI (configure voip > qoe
bw-profile).

To configure a Bandwidth Profile:
1. Open the Bandwidth Profile table (Setup menu > Signaling & Media tab > Media
folder > Quality of Experience > Bandwidth Profile).
2. Click New; the following dialog box appears:
3. Configure a rule according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save to flash memory.
Table 16-5: Bandwidth Profile Table Parameter Descriptions
Parameter
General
Index
[BWProfile_Index]
Name
name
[BWProfile_Name]
Egress Audio Bandwidth
egress-audio-bandwidth
[BWProfile_EgressAudioBandwidth]
Ingress Audio Bandwidth
ingress-audio-bandwidth
[BWProfile_IngressAudioBandwidth]
User's Manual
The change occurs if the current bandwidth
crosses the configured Minor threshold with
hysteresis.
Figure 16-6: Bandwidth Profile Table - Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 20 characters.
Defines the major (total) threshold for outgoing audio traffic (in
Kbps).
Defines the major (total) threshold for incoming audio traffic (in
Kbps).
Calculation
Description
318
Mediant 4000 SBC
Threshold based on
Example
25,600 Kbps
[32,000 - (10% x
64,000)]
Document #: LTRT-40203