AudioCodes Mediant 4000 SBC User Manual page 534


To configure Outbound Manipulation rules:
1. Open the Outbound Manipulations table (Setup menu > Signaling & Media tab >
SBC folder > Manipulation > Outbound Manipulations).
2. Click New; the following dialog box appears:
Figure 26-3: Outbound Manipulations Table- Add Dialog Box
3. Configure an Outbound Manipulation rule according to the parameters described in
the table below.
4. Click Apply.
Table 26-2: Outbound Manipulations Table Parameter Description
Parameter
Routing Policy
routing-policy-name
[IPOutboundManipulation_RoutingP
olicyName]
General
Index
[IPOutboundManipulation_Index]
Name
manipulation-name
[IPOutboundManipulation_Manipulati
onName]
User's Manual
Assigns a Routing Policy to the rule. The Routing Policy
associates the rule with an SRD(s). The Routing Policy also
defines default LCR settings as well as the LDAP servers if the
routing rule is based on LDAP routing (and Call Setup Rules).
If only one Routing Policy is configured in the Routing Policies
table, the Routing Policy is automatically assigned. If multiple
Routing Policies are configured, no value is assigned.
To configure Routing Policies, see ''Configuring SBC Routing
Policy Rules'' on page 518.
Note: The parameter is mandatory.
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters. By default,
no value is defined.
534
Mediant 4000 SBC
Description
Document #: LTRT-40203