AudioCodes Mediant 4000 SBC User Manual page 131

User's Manual
trusted networks on different physical Ethernet ports. Multiple entries in the IP
Interfaces table may be associated with the same Ethernet Device, providing multi-
homing IP configuration (i.e., multiple IP addresses on the same interface/VLAN).
Complementing the IP Interfaces table is the Static Routes table, which lets you configure
static routing rules for non-local hosts/subnets. For more information, see ''Configuring
Static IP Routing'' on page 137.
Note:
interface configuration guidelines in ''IP Interfaces Table Configuration Guidelines'' on
page 134.
The following procedure describes how to configure IP network interfaces through the Web
interface. You can also configure it through ini file (InterfaceTable) or CLI (configure
network > interface network-if).

To configure IP network interfaces:
1. Open the IP Interfaces table (Setup menu > IP Network tab > Core Entities folder >
IP Interfaces).
2. Click New; the following dialog box appears:
3. Configure the IP network interface according to the parameters described in the table
below.
4. Click Apply.
Note:
•
If you modify the OAMP interface's address, after clicking Apply you will lose
connectivity with the device and need to access the device with the new address.
•
If you edit or delete an IP interface, current calls using the interface are
immediately terminated.
•
If you delete an IP interface, row indices of other tables (e.g., Media Realms table)
that are associated with the deleted IP interface, lose their association with the
interface ('Interface Name' field displays "None") and the row indices become
invalid.
•
When editing or deleting the Maintenance interface for HA mode, you must reset
the device for your changes to take effect.
Version 7.2
Before configuring IP interfaces, it is recommended that you read the IP
Figure 11-3: IP Interfaces Table - Dialog Box
131
11. Network
Mediant 4000 SBC