•
Configure the 'RTCP Mux' parameter (IpProfile_SBCRTCPMux) to Supported.
Multiplexing is required as the DTLS handshake is done for the port used for RTP
and thus, RTCP and RTP must be multiplexed onto the same port.
•
Configure the ini file parameter, SbcDtlsMtu (or CLI command configure voip >
sbc settings > sbc-dtls-mtu) to define the maximum transmission unit (MTU) size
for the DTLS handshake.
Note:
•
The 'Cipher Server' parameter must be configured to "ALL".
•
The device does not support forwarding of DTLS transparently between endpoints.
User's Manual
208
Mediant 4000 SBC
Document #: LTRT-40203