Auxiliary And Configuration File Name Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter

60.1.7 Auxiliary and Configuration File Name Parameters

The table below lists the ini file parameters associated with the Auxiliary files. For more
information on Auxiliary files, see ''Loading Auxiliary Files'' on page 627.
Table 60-7: Auxiliary and Configuration File Parameters
Parameter
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
[SaveConfiguration]
Auxiliary and Configuration File Name Parameters
Call Progress Tones File
[CallProgressTonesFilename]
Prerecorded Tones File
[PrerecordedTonesFileName]
Dial Plan File
[DialPlanFileName]
[UserInfoFileName]
Version 7.2
Note: For the parameter to take effect, a device reset is required.
before processing the updated ini file.

[0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).

[1] = Enable (default).
Note: The parameter is applicable only for automatic HTTP update or
Web ini file upload (not applicable if the ini file is loaded using BootP).
Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).

[0] = Configuration isn't saved to flash memory.

[1] = (Default) Configuration is saved to flash memory.
Defines the name of the file containing the Call Progress Tones
definitions.
For the ini file, the name must be enclosed by single apostrophes, for
example, 'cpt_us.dat'.
For more information on how to create and load this file, refer to
DConvert Utility User's Guide.
Note: For the parameter to take effect, a device reset is required.
Defines the name of the file containing the Prerecorded Tones.
Note: For the parameter to take effect, a device reset is required.
Defines the name of the Dial Plan file. This file should be created
using AudioCodes DConvert utility (refer to DConvert Utility User's
Guide).
For the ini file, the name must be enclosed by single apostrophes, for
example, 'dial_plan.dat'.
Defines the name of the file containing the User Information data.
For the ini file, the name must be enclosed by single apostrophes, for
example, 'userinfo_us.dat'.
815
60. Configuration Parameters Reference
Description
Description
Mediant 4000 SBC