Searching For Configuration Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
6.1.7

Searching for Configuration Parameters

You can search in the Web interface for parameter names (standalone or table
parameters) and values. The search key can include the full parameter name (Web or ini
file name) or a substring of it. If you search for a substring, all parameters containing the
substring in their names are listed in the search result. For example, to search for the
parameter 'Telnet Server TCP Port', you can use any of the following search keys:

"Telnet Server TCP Port" (Web name)

"TelnetServerPort" (ini file name)

"Telnet"

"Port"
When the device completes the search, it displays a list of found results based on the
search key. Each possible result, when clicked, opens the page on which the parameter or
value is located. You need to click the most appropriate result.

To search for a parameter:
1. In the search box, enter the search key (parameter name or value).
2. Click the search
based on your search key. Each searched result displays the following:
•
Navigation path (link) to the page on which the parameter appears
•
Parameter's name
•
Parameter's value
•
Brief description of parameter
3. Click the link of the navigation path corresponding to the required found parameter to
open the page on which the parameter appears.
Version 7.2
icon; the Search Result window appears, listing found parameters
Figure 6-17: Search Result Window
61
6. Web-Based Management
Mediant 4000 SBC