AudioCodes Mediant 4000 SBC User Manual page 645

User's Manual
Note:
traffic-affecting. To minimize the disruption of current calls, it is recommended to
perform this procedure during periods of low traffic.

To install a License Key file for standalone devices through Web interface:
1. Open the License Key page (see Viewing the License Key on page 641).
2. Back up the currently installed License Key, as a precaution. If the new License Key
does not comply with your requirements, you can re-load this backed-up License Key
to restore the device's original capabilities. For backing up the License Key, see
Backing up the License Key on page 651.
3. Click the Load By File button, navigate to the License Key file on your computer, and
then select the file to load to the device; the Apply New License Key button appears.
The License Key page uses color-coded icons to indicate the changes between the
previous License Key and the newly loaded License Key (for more information, see
Installing License Key through Web Interface on page 642).
Note:
information, see Resetting the Device on page 621.
5. Click Apply New License Key; the following message box appears:
4. Click Reset; the device begins to save the file to flash memory with a reset and the
following progress message box appears:
Version 7.2
The License Key installation process includes a device reset and is therefore,
If want to cancel installation, reset the device without a save to flash. For more
Figure 38-7: Apply New License Key Message
Figure 38-8: Reset in Progress for License Key
645
38. License Key
Mediant 4000 SBC