AudioCodes Mediant 4000 SBC User Manual page 828

Parameter
[NTPUpdateInterval]
NTP Authentication Key
Identifier
auth-key-id
[NtpAuthKeyId]
NTP Authentication Secret
Key
auth-key-md5
[ntpAuthMd5Key]
Regional Clock and Daylight Saving Time Parameters
UTC Offset
configure system > clock >
utc-offset
[NTPServerUTCOffset]
Daylight Saving Time
configure system > clock >
summer-time > summer-time
[DayLightSavingTimeEnable]
Start Time / Day of Month
Start
configure system > clock >
summer-time > start
[DayLightSavingTimeStart]
End Time / Day of Month
End
configure system > clock >
User's Manual
The default interval is 86400 (i.e., 24 hours). The range is 0 to
214783647.
Note: It is not recommend to set the parameter to beyond one month
(i.e., 2592000 seconds).
Defines the NTP authentication key identifier for authenticating NTP
messages. The identifier must match the value configured on the NTP
server. The NTP server may have several keys configured for different
clients; this number identifies which key is used.
The valid value is 1 to 65535. The default is 0 (i.e., no authentication is
done).
Defines the secret authentication key shared between the device
(client) and the NTP server, for authenticating NTP messages.
The valid value is a string of up to 32 characters. By default, no key is
defined.
Defines the Universal Time Coordinate (UTC) offset (in seconds) from
the local time.
The valid range is -43200 to 43200. The default is 0.
Note: The offset setting is applied only on the hour. For example, if
you configure the parameter at 15:42, the device applies the setting
only at 16:00.
Enables daylight saving time (DST).

[0] Disable (default)

[1] Enable
Defines the date and time when DST begins. This value can be
configured using any of the following formats:

Day of year - mm:dd:hh:mm, where:

mm denotes month

dd denotes date of the month

hh denotes hour

mm denotes minutes
For example, "05:01:08:00" denotes daylight saving starting from
May 1 at 8 A.M.

Day of month - mm:day/wk:hh:mm, where:

mm denotes month (e.g., 04)

day denotes day of week (e.g., FRI)

wk denotes week of the month (e.g., 03)

hh denotes hour (e.g., 23)

mm denotes minutes (e.g., 10)
For example, "04:FRI/03:23:00" denotes Friday, the third week of
April, at 11 P.M. The week field can be 1-5, where 5 denotes the
last occurrence of the specified day in the specified month. For
example, "04:FRI/05:23:00" denotes the last Friday of April, at 11
P.M.
Defines the date and time when DST ends. For a description of the
format of this value, see the DayLightSavingTimeStart parameter.
828
Mediant 4000 SBC
Description
Document #: LTRT-40203