AudioCodes Mediant 4000 SBC User Manual page 276

3. Click New; the following dialog box appears:
Figure 15-46: HTTP Remote Hosts Table - Add Dialog Box
4. Configure an HTTP remote host according to the parameters described in the table
below.
5. Click Apply, and then save your settings to flash memory.
Table 15-19: HTTP Remote Hosts Table Parameter Descriptions
Parameter
Index
rest-servers
[HTTPRemoteHosts_RemoteHostindex]
Name
[HTTPRemoteHosts_Name]
Address
rest-address
[HTTPRemoteHosts_Address]
User's Manual
Description
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

The parameter is mandatory.
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters. By
default, no value is defined.
Note:

Each row must be configured with a unique name.

The parameter is mandatory.
Defines the address (IP address or FQDN) of the remote
host.
The valid value is a string of up to 80 characters.
Note:

An IPv6 address can only be configured if the
interface is a CONTROL type.

If the address is an FQDN and the DNS resolution
results in multiple IP addresses, the device device
attempts to establish multiple connections (sessions)
for each IP address. Only the first 10 resolved IP
addresses are used regardless of the number of
hosts.
276
Mediant 4000 SBC
Document #: LTRT-40203