♦
♦
♦
♦
4.
In the SIP Interfaces table, configure the following SIP Interfaces:
•
Index 0 (SIP Interface for IP Phone A):
♦
♦
♦
•
Index 1 (SIP Interface for IP Phone B):
♦
♦
♦
5.
In the Proxy Sets table, configure a Proxy Set for each proxy server (primary and
secondary):
•
Index 0:
♦
♦
♦
•
Index 1:
♦
♦
♦
6.
In the IP Groups table, configure the following IP Groups:
•
Index 0:
♦
♦
♦
♦
•
Index 1:
♦
♦
♦
♦
•
Index 2:
♦
♦
•
Index 3:
♦
♦
7.
In the Classification table, configure rules to classify calls from the IP Phones based
on SIP Interface:
•
Index 0:
♦
♦
•
Index 1:
User's Manual
Manipulation Set ID: 2
Action Subject: header.contact.url.ac-int
Action Type: Modify
Action Value: '2'
Name: Interface-1
UDP Port: 5060
Pre-classification Manipulation Set ID: 1
Name: Interface-2
UDP Port: 5080
Pre-classification Manipulation Set ID: 2
Proxy Name: Primary
SBC IPv4 SIP Interface: Interface-1
Proxy Address: 200.10.10.1
Proxy Name: Secondary
SBC IPv4 SIP Interface: Interface-2
Proxy Address: 200.10.10.2
Type: Server
Name: Primary-Proxy
Proxy Set: Primary
Classify By Proxy Set: Enable
Type: Server
Name: Sec-Proxy
Proxy Set: Secondary
Classify By Proxy Set: Enable
Type: User
Name: IP-Phone-A
Type: User
Name: IP-Phone-B
Source SIP Interface: Interface-1
Source IP Group: IP-Phone-A
576
Mediant 4000 SBC
Document #: LTRT-40203