AudioCodes Mediant 4000 SBC User Manual page 350


To configure an IP Group:
1. Open the IP Groups table (Setup menu > Signaling & Media tab > Core Entities
folder > IP Groups).
2. Click New; the following dialog box appears:
3. Configure an IP Group according to to the parameters described in the table below.
4. Click Apply.
Table 17-6: IP Groups Table Parameter Descriptions
Parameter
SRD
srd-name
[IPGroup_SRDName]
General
Index
[IPGroup_Index]
Name
name
[IPGroup_Name]
Topology Location
topology-location
[IPGroup_TopologyLocation]
User's Manual
Assigns an SRD to the IP Group.
If only one SRD is configured in the SRDs table, the SRD is assigned
by default. If multiple SRDs are configured in the SRDs table, no value
is assigned by default and you must assign one.
To configure SRDs, see Configuring SRDs on page 331.
Note:

The parameter is mandatory.

For the parameter to take effect, a device reset is required.
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
Defines the display location of the IP Group in the Topology view of
the Web interface.

[0] Down = (Default) The IP Group element is displayed on the
lower border of the view.

[1] Up = The IP Group element is displayed on the upper border of
350
Mediant 4000 SBC
Description
Document #: LTRT-40203