57.3
Viewing Test Call Status
You can view the status of test call rules in the 'Test Status' field of the Test Call Rules
table. The status can be one of the following:
Status
"Idle"
Test call is not active.
"Scheduled"
Test call is planned to run (according to the 'Schedule Interval' parameter).
"Running"
Test call has been started (i.e., by clicking Dial from the 'Action' drop-down list).
"Receiving":
Test call has been automatically activated by calls received from the remote
endpoint for the test call endpoint (when all these calls end, the status returns to
"Idle").
"Terminating"
Test call is in the process of terminating currently established calls (when Drop
Call is clicked from the 'Action' drop-down list to stop the test).
"Done"
Test call has successfully completed (or was prematurely stopped by clicking the
Drop Call from the 'Action' drop-down list).
57.4
Viewing Test Call Statistics
You can view statistical information on the test call.
To view statistics of a test call:
1.
In the Test Call Rules table, select the required test call row.
2.
Scroll down the page to the area below the table. Statistics of the selected test call are
displayed under the Statistics group, as shown in the example below:
User's Manual
Table 57-2: Test Call Status Description
Figure 57-2: Viewing Test Call Statistics
788
Description
Document #: LTRT-40203
Mediant 4000 SBC