AudioCodes Mediant 4000 SBC User Manual page 808

Parameter
[UseWebLogo]
[WebLogoText]
[LogoWidth]
[LogoFileName]
User's Manual
on page 65.
Note: To enable customization of the device name, see the
UseProductName parameter.
Defines whether the Web interface displays a logo image or
text.

[0] = (Default) The Web interface displays a logo image,
configured by the LogoFileName parameter.

[1] = The Web interface displays text, configured by the
WebLogoText parameter.
For more information, see Replacing the Corporate Logo on
page 62.
Defines the text that is displayed instead of the logo in the
Web interface.
The valid value is a string of up to 15 characters.
For more information, see Replacing the Corporate Logo
with Text on page 64.
Note: The parameter is applicable only when the
UseWebLogo parameter is configured to 1.
Defines the width (in pixels) of the logo image that you want
displayed in the Web interface instead of the default logo.
The valid value is 0 to 199. The default is 145.
For more information, see Replacing the Corporate Logo
with an Image on page 63.
Notes:

The optimal setting depends on your screen resolution.

If the width of the loaded image is greater than the
maximum value, the device automatically resizes the
image to the default width size.

The height is limited to 24 pixels.

The parameter is applicable only when the UseWebLogo
parameter is configured to 0.

To define the image file, see the LogoFileName
parameter.
Defines the name of the image file that you want loaded to
the device. This image is displayed as the logo in the Web
interface (instead of AudioCodes logo).
The file name can be up to 47 characters.
For more information, see Replacing the Corporate Logo
with an Image on page 63.
Notes:

The image file type can be one of the following: GIF,
PNG, JPG, or JPEG.

The size of the image file can be up to 64 Kbytes.

The parameter is applicable only when the UseWebLogo
parameter is configured to 0.
808
Mediant 4000 SBC
Description
Document #: LTRT-40203