Network Application Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter

60.7.2 Network Application Parameters

The SIP network application parameters are described in the table below.
Parameter
SRDs Table
SRDs
configure voip > srd
[SRD]
SIP Interfaces Table
SIP Interfaces
configure voip > sip-
interface
[SIPInterface]
configure voip > sip-
definition settings > tcp-
keepalive-time
[TCPKeepAliveTime]
Version 7.2
(i.e., 100 messages divided by 5 sec; 100 per 5 seconds).

If you configure the MaxGeneratedRegistersRate parameter to
100 and the GeneratedRegistersInterval to 1, the device
sends a maximum of a 100 REGISTER messages per second.
Table 60-31: SIP Network Application Parameters
Defines Signaling Routing Domains (SRD).
The format of the ini file table parameter is as follows:
[ SRD ]
FORMAT SRD_Index = SRD_Name, SRD_IntraSRDMediaAnchoring,
SRD_BlockUnRegUsers, SRD_MaxNumOfRegUsers,
SRD_EnableUnAuthenticatedRegistrations, SRD_SharingPolicy,
SRD_UsedByRoutingServer, SRD_SBCOperationMode,
SRD_SBCRoutingPolicyName;
[ \SRD ]
For more information, see ''Configuring SRDs'' on page 331.
Defines SIP Interfaces.
The format of the ini file table parameter is as follows:
[ SIPInterface ]
FORMAT SIPInterface_Index = SIPInterface_InterfaceName,
SIPInterface_NetworkInterface, SIPInterface_ApplicationType,
SIPInterface_UDPPort, SIPInterface_TCPPort, SIPInterface_TLSPort,
SIPInterface_AdditionalUDPPorts, SIPInterface_SRDName,
SIPInterface_MessagePolicyName, SIPInterface_TLSContext,
SIPInterface_TLSMutualAuthentication,
SIPInterface_TCPKeepaliveEnable,
SIPInterface_ClassificationFailureResponseType,
SIPInterface_PreClassificationManSet,
SIPInterface_EncapsulatingProtocol, SIPInterface_MediaRealm,
SIPInterface_SBCDirectMedia, SIPInterface_BlockUnRegUsers,
SIPInterface_MaxNumOfRegUsers,
SIPInterface_EnableUnAuthenticatedRegistrations,
SIPInterface_UsedByRoutingServer, SIPInterface_TopologyLocation,
SIPInterface_PreParsingManSetName;
[ \SIPInterface ]
For more information, see ''Configuring SIP Interfaces'' on page 341.
Defines the interval (in sec) between the last data packet sent and the
first keep-alive probe to send.
The valid value is 10 to 65,000. The default is 60.
Note:
60. Configuration Parameters Reference
Description
Description
859 Mediant 4000 SBC