Assigning Cost Groups To Routing Rules - AudioCodes Mediant 4000 SBC User Manual

Parameter
End Time
end-time
[CostGroupTimebands_EndTime]
Connection Cost
connection-cost
[CostGroupTimebands_ConnectionCost]
Minute Cost
minute-cost
[CostGroupTimebands_MinuteCost]

15.5.2.2 Assigning Cost Groups to Routing Rules

To use your configured Cost Groups, you need to assign them to routing rules:

IP-to-IP Routing table - see Configuring SBC IP-to-IP Routing Rules on page 499
User's Manual
Description
For example, SAT:22:00 denotes Saturday at 10 pm.
Defines the day and time of day until when this time band
is applicable. For a description of the valid values, see the
parameter above.
Defines the call connection cost during the time band. This
is added as a fixed charge to the call.
The valid value range is 0-65533. The default is 0.
Note: The entered value must be a whole number (i.e., not
a decimal).
Defines the call cost per minute charge during the time
band.
The valid value range is 0-65533. The default is 0.
Note: The entered value must be a whole number (i.e., not
a decimal).
270
Mediant 4000 SBC
Document #: LTRT-40203