AudioCodes Mediant 4000 SBC User Manual page 105

User's Manual
3. Configure the TLS Context according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
Parameter
General
Index
tls <ID>
[TLSContexts_Index]
Name
name
[TLSContexts_Name]
TLS Version
tls-version
[TLSContexts_TLSVersion]
DTLS Version
[TLSContexts_DTLSVersion]
Version 7.2
Table 10-1: TLS Contexts Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 31 characters.
Defines the supported SSL/TLS protocol version. Clients attempting
to communicate with the device using a different TLS version are
rejected.

[0] Any - Including SSLv3 = (Default) SSL 3.0 and all TLS
versions are supported.

[1] TLSv1.0 = Only TLS 1.0.

[2] TLSv1.1 = Only TLS 1.1.

[3] TLSv1.0 and TLSv1.1 = Only TLS 1.0 and TLS 1.1.

[4] TLSv1.2 = Only TLS 1.2.

[5] TLSv1.0 and TLSv1.2 = Only TLS 1.0 and TLS 1.2.

[6] TLSv1.1 and TLSv1.2 = Only TLS 1.1 and TLS 1.2.

[7] TLSv1.0 TLSv1.1 and TLSv1.2 = Only TLS 1.0, TLS 1.1 and
TLS 1.2 (excludes SSL 3.0).
Defines the Datagram Transport Layer Security (DTLS) version,
which is used to negotiate keys for SBC calls.

[0] Any (default)

[1] DTLSv1.0

[2] DTLSv1.2
DTLS secures UDP-based media streams (according to RFC 5763
10. Configuring SSL/TLS Certificates
Description
105 Mediant 4000 SBC