Viewing Network Status; Viewing Active Ip Interfaces; Viewing Ethernet Device Status; Viewing Ethernet Port Information - AudioCodes Mediant 4000 SBC User Manual

User's Manual
50

Viewing Network Status

This section describes how to view network-related status.
50.1

Viewing Active IP Interfaces

You can view the device's active IP interfaces that are configured in the IP Interfaces table
(see ''Configuring IP Network Interfaces'' on page 129).

To view active IP network interfaces:

Open the IP Interface Status page (Monitor menu > Monitor tab > Network Status
folder > IP Interface Status).
50.2

Viewing Ethernet Device Status

You can view the status of configured Ethernet Devices that have been successfully
applied. To configure Ethernet Devices, see ''Configuring Underlying Ethernet Devices'' on
page 127.

To view Ethernet Device status:

Open the Ethernet Device Status page (Monitor menu > Monitor tab > Network
Status folder > Ethernet Device Status).
50.3

Viewing Ethernet Port Information

You can view status information of the device's Ethernet ports. To configure Ethernet ports,
see ''Configuring Underlying Ethernet Devices'' on page 127
Note:
port information of the redundant device, by opening the Redundant Ethernet Port
Information page (Monitor menu > Monitor tab > Network Status folder > Redundant
Ethernet Port Information).

To view Ethernet port information:

Open the Ethernet Port Information table, by doing one of the following:
•
Navigation tree: Monitor menu > Monitor tab > Network Status folder >
Ethernet Port Information.
•
Monitor home page: Click an Ethernet port on the graphical display of the device
(see ''Viewing Device Status on Monitor Page'' on page 699).
Version 7.2
If the device is operating in High-Availability mode, you can also view Ethernet
725
50. Viewing Network Status
Mediant 4000 SBC