Building And Viewing Sip Entities In Topology View - AudioCodes Mediant 4000 SBC User Manual

Parameter
Transport Type
transport-type
[ProxyIp_TransportType]
17.6

Building and Viewing SIP Entities in Topology View

The Topology view lets you easily build and view your main SIP entities, including IP
Groups, SIP Interfaces, and Media Realms. The Topology view graphically displays these
entities and the associations between them, giving you a better understanding of your SIP
topology and configuration. The Topology view also lets you configure additional SIP
settings that are important to your deployment such as routing and manipulation. You can
use the Topology view as an alternative to configuring the entities in their respective Web
pages or you can use it in combination.

To access the Topology view:

Click the Topology View home
Topology View).
The main areas of the Topology view is shown below and described in the subsequent
table.
User's Manual
Groups on page 349).
Defines the transport type for communicating with the proxy.

[0] UDP

[1] TCP

[2] TLS

[-1] = (Default) The transport type is according to the settings of
the global parameter, SIPTransportType.
icon (Setup menu > Signaling & Media tab >
Figure 17-11: Areas of Topology View
372
Mediant 4000 SBC
Description
Document #: LTRT-40203